ส่วนประกอบ
ตัวล็อกด้านนอก
| # | ชิ้นส่วน | หน้าที่ |
|---|---|---|
| 1 | Number Pad | The pin number is entered here to register or to open the door |
| 2 | RFID Card Sensor | It is the sensor where card is placed when opening the door or during card registration |
| 3 | Battery Lamp | When the battery is low it turns on along with the alarm |
| 4 | Mechanical key Hole cover | Protects the emergency mechanical key hole |
| 5 | Mechanical key Hole | In case of emergency the mechanical key can be inserted here to open the door |
| 6 | Outbody handle | It is used when opening or closing the door from outside |
| 7 | 9V Battery Terminal | When the battery is completely discharged. Operate the lock using a 9V battery. |
| 8 | Reset Switch | When the product is not functioning normally, initialize the lock through the Reset switch |
ตัวล็อกด้านใน
| # | ชิ้นส่วน | หน้าที่ |
|---|---|---|
| 1 | Battery Cover | This is the cover that protects the battery and registration button |
| 2 | Registration Button | This is used when registering Pin & Card |
| 3 | Safety button | When enabled will not allow opening of door from outside either with Pin or Card |
| 4 | Mortise | Is mounted at the side of the lock. It is the main locking device. |
| 5 | Deadbolt | It is the locking mechanism |
| 6 | Latch Bolt | It fix the door in place |
| 7 | Alkaline AA Battery | Is the main power supply of the lock |
| 8 | Manual Lock Button | It is used to close the door in manual locking mode |
| 9 | Inbody Handle | It is used to open or close the door from the inside |