Skip to main content

Special Features

Guest PIN Registration​

Steps​

  1. Open the [Battery Cover]. Press [Registration] button once. The 'beep' sound will be heard.
  2. Enter current pin number followed by [✱] button.
  3. Check if the numbers [1, 2, 3, 7, 8, 9, 0, #] has been lighted on the number pad. Press number [3] button.
  4. Enter new guest pin number to be registered (4~12 digits) and press [✱] button to complete the registration.
note

The guest pin number is 1 time entry only.

note

New registration will delete old guest pin number

note

When registration mode is cancelled old pin number will be restored

Outside Force Lock​

When this is set the door cannot be opened from the inside. [Open/Close] button is disable.

Steps​

  1. While the door is closed, touch the number pad
  2. Enter pin number
  3. Touch the [✱] button and touch the [0] button
  4. When the melody is heard, the setting is complete. (The [open/close] button is disabled.)

Cancellation: Open the door by pin number and the [Force Lock] setting will be cancelled

Inside Force Lock​

When this is set the door cannot be opened from the outside. Pin number entry is disabled.

Steps​

  1. While the door is closed
  2. Press the [force Lock] button for 3 seconds. When the melody is heard, the setting is complete.

Cancellation: Open the door by the [Manual Knob (lock/unlock)] or by the [Open/Close] button inside and the [Force Lock] will be cancelled.

Auto / Manual Lock Setting​

Sets the door locking mode to Manual or Automatic Lock Mode

Steps​

  1. Press [Open/Close] button
  2. Touch the number pad
  3. Enter pin number then press [✱] button 2 times
  4. Press [4] button: Auto lock setting. Press [7] button: Manual lock setting
note

Automatic mode is set in default. When you set the manual lock, The door will not automatically lock after closing the door. You need to press [Open/Close] button inside or Touch the number pad outside to close the door

Multi-touch Security Setting​

Steps​

  1. Touch the [Number pad] on the Outbody. Enter the pin number, press the [✱] button.
  2. Press the [5] button on the number pad, a melody will be heard and Multi-touch feature setting is complete.

Cancellation: To cancel the setting, just repeat steps 1, 2.

note

This is a security feature that prevents the pin number from being exposed, by removing traces of fingerprint patterns on the number pad. The multi-touch feature is disable in default.

caution

When multi-touch feature is enabled, after entering pin number press the 3 digits number that is displayed on the screen. Press [✱] button and the door will open. When this feature is enabled, the random number feature is cancelled.

Dual-mode Security Setting​

Steps​

  1. Press [Registration] button for 5 seconds. The entire LED will light up. After 3 seconds the alarm will stop. And after 2 seconds it will be on again.
  2. Enter current pin number. When you press [✱] button, the front panel LED will blink and light-up.
  3. Press [1] button to Turn-off Dual-Mode Security. Press [3] button to Turn-on Dual-Mode Security. During Dual-Mode Security setting, when the confirmation sound is heard, everything will be turned-off.
note

The pin number & smart card should be registered first before setting this feature