Skip to main content

RFID Card Registration

Compatibility

Only 13.56 MHz RFID cards compatible with EPIC work with this lock. Cards included in the box must be registered manually.

Door must be open during registration

Mode A — Register all at once​

  1. Open the battery cover. Press the Registration button once.
  2. Enter your PIN, then press *.
  3. Press number 2 (or 4 depending on model) to select RFID mode.
  4. Place each card on the reader one at a time. A beep confirms each registration.
  5. Press Registration to finish.

Up to 100 cards can be registered.

Mode B — Register one by one (assign slot numbers)​

  1. Follow steps 1-3 above.
  2. Enter a 3-digit slot number (001–100), then press # or *.
  3. Place the card on the reader. The slot number flashes on the keypad.
  4. Repeat for additional cards, or press Registration to finish.