Skip to main content

Special Features

Guest PIN Registration​

Steps​

  1. Open battery compartment cover. Press [Registration] button once. ~beep sound will be heard.
  2. Enter current pin number followed by [✱] button. Check if the number [1, 2, 3, 4, 8, 9] is lighted on the number pad. Press [3] before the number pad turns off.
  3. Enter New Guest Pin number to be registered 4~12 digits. Press [✱] button on the number pad. A melody will be heard, and the registration is complete.
note

REGISTERING MORE THAN 12 DIGITS WILL RESULT TO ERROR. NO. [2] BUTTON WILL BE FLASHING

note

REGISTERING LESS THAN 4 DIGITS WILL RESULT TO ERROR NO. [2] BUTTON WILL BE FLASHING

note

NEW REGISTRATION WILL DELETE OLD REGISTERED PIN NUMBER

note

IF NEW PIN NUMBER IS NOT REGISTERED AFTER PRESSING REGISTRATION BUTTON THE REGISTRATION MODE WILL BE CANCELLED

caution

The guest pin number is for 1 time entry only

Outside Force Lock​

Outside Double Lock - When enabled will not allow Pin, Card, Fingerprint entry from outside.

Steps​

  1. After closing the door
  2. Press [Close] button located on the inner body for 3 seconds. Melody will be heard, and setting is complete.

Cancellation: Open the door from inside by pushing the handle or activate the [Close] button and the Internal Double Lock setting will be cancelled.

Inside Force Lock​

Inside Double Lock - It is a function to block abnormal operation of the interior handle.

Controls: Cancel Force Lock / Set Force Lock

Sound Volume Setting​

This feature allows the user to adjust the operation sound volume per level. (perform while door closed) ※ Sound can be adjusted up to 7 levels.

Steps​

  1. Touch the number pad
  2. Enter registered Pin Number
  3. Press [✱] button
  4. Press [3] or [6] button
note

Press [3] button to increase sound. Press [6] button to decrease sound. In mute mode the number pad will blink, when you press a number. The volume level is set on high in default.

Sound Mute Setting​

Regardless of the volume setting, This feature lets you mute the operation melody. This is per 1 time usage only. The operation sound will occur on next operation.

Steps​

  1. Touch the number pad, press the [✱] button (in mute state)
  2. Enter Pin number, press [✱] button, door will open. (Number pad will blink)

Auto / Manual Lock Setting​

An optional feature that lets you set the lock in automatic and manual Lock mode

Steps​

  1. Press the [Close] button. When the deadbolt comes out of the mortise
  2. Touch the number pad
  3. Enter Pin number. Press [✱] button 2 times
  4. Press [4] button for Automatic Mode. Press [7] button for Manual Mode
note

Automatic Lock Mode is set in default. In Manual Lock Mode, the door will not lock after closing the door, instead touch the number pad outside or press the [Close] button inside to lock the door.

RFID Auto / Manual Detection​

An optional feature that lets you set the RFID Card detection to automatic and manual mode

Steps​

  1. Touch the number pad
  2. Enter the Pin number
  3. Press [#] button 2 times
  4. Press [1] button for Automatic Mode. Press [3] button for Manual Mode
note

① In Automatic Mode, Place the RFID Card on the card reader and the door will open. ② In Manual Mode, Touch the number pad, Place the RFID Card on the card reader and the door will open. ※ Automatic Mode is enabled in default.

Multi-touch Security Setting​

Steps​

  1. Touch the number pad on the outer body. Enter the pin number, press the [✱] button.
  2. Press the [5] button on the number pad, a melody will be heard and Multi-touch feature setting is complete.
note

This is a security feature that prevents the pin number from being exposed, by removing traces of fingerprint patterns on the number pad. The multi-touch feature is disabled in default.

caution

When multi-touch feature is enabled, after entering pin number press the 3 digits number that is displayed on the screen. Press [✱] button and the door will open. When this feature is enabled, the random number feature is cancelled.

Dual-mode Security Setting​

Steps​

  1. Press [Registration] button for 5 seconds. The entire LED will light up. After 3 seconds the alarm will stop. And after 2 seconds it will be on again.
  2. Enter current user password. When you press [✱] button, The front panel LED will blink and light-up.
  3. Press [1] button to Turn-Off Dual-Mode Security. Press [3] button to Turn-On Dual-Mode Security. During Dual-Mode Security Setting, when the confirmation sound is heard, everything will be turned-off.

How to Open: PIN NUMBER + (FINGERPRINT OR RFID CARD)

note

The Pin number, Fingerprint & RFID card should be registered first before setting this feature.

Home Network Module & Remote Control​

This feature lets you open the door remotely via home network devices and remote control (Optional). ※ Home Network Module and Remote Control setting procedure is the same

Steps​

  1. Press [Registration] button followed by [✱] button. Check if the number [1, 2, 3, 4, 8, 9] is lighted on the number pad
  2. Home Network Module: Press [Registration] button. Remote Control: Press [OPEN] button
  3. Press [✱] button on the number pad. Registration is complete

Deletion Steps​

  1. Press [Registration] button. Enter pin number. Followed by [✱] button. Check if the number [1, 2, 3, 4, 8, 9] is lighted on the number pad.
  2. Press [0] button.
  3. Press [#] button for 5 seconds. When the melody is heard. Deletion is complete
note

For registration of additional remote control, repeat step number 2. Up to 5 remote controls can be registered.