Skip to main content

Special Features

Guest PIN Registration​

Steps​

  1. Press [Registration] button once. Enter current pin number followed by [✱] button.
  2. Press number 3 button.
  3. Enter new Guest Pin Number to be registered 4~12 digits. Press [✱] button on the number pad — a melody will be heard, and the registration is complete.
note

WHEN REGISTRATION MODE IS CANCELLED OLD PIN NUMBER WILL BE RESTORED.

note

NEW REGISTRATION WILL DELETE OLD REGISTERED PIN NUMBER.

caution

THE GUEST PIN NUMBER IS FOR 1 TIME ENTRY ONLY.

Outside Force Lock​

This security setting will disable the use of [Open/Close] button inside.

Steps​

  1. While the door is closed. Touch the number pad. Enter Registered pin number.
  2. Press [✱] button, followed by [0] button.

Cancellation: Open the door using Manual Lock / Unlock lever and force lock setting will be cancelled.

Inside Force Lock​

This security setting will not allow any forms of entry from outside (Pin Number and RFID Card).

Steps​

  1. While door is closed. Press [Open/Close] button for 3 seconds. When the confirmation tone is heard, the setting is complete.

Cancellation: Open the door using Manual Lock/Unlock knob or pressing [Open/Close] Button inside and force lock setting will be cancelled.

Sound Volume Setting​

This feature allows the user to adjust the operation sound volume per level. (Perform while door is closed.)

Steps​

  1. Press number pad outside. Enter Pin number, Press [✱] button.
  2. Press [3] to increase sound. Press [6] to decrease the sound.
note

Sound can be adjusted up to 7 levels.

Sound Mute Setting​

Touch external number pad, Press [✱] button. Enter Pin number and the mute setting (Keypad tone and door operation tone) will be mute. This feature is 1 time operation only.

note

When Sound Mute is set, when you enter a number on the number pad, it will be blinking. This is 1 time operation. After 1 usage, the sound will come back to normal.

Auto / Manual Lock Setting​

Set the door to automatic or manual lock mode.

Automatic Lock Mode​

  1. Touch the Number Pad → Enter Pin number → Press [✱] button twice → 4

Manual Lock Mode​

  1. Touch the Number Pad → Enter Pin number → Press [✱] button twice → 7
note

In manual lock mode, the door will not lock after closing the door. To lock inside, Press [Open/Close] button or Touch the number pad outside. Enter [✱] button and the door will lock.

note

During purchase of item the Manual Lock Number Pad is set in default.

RFID Auto / Manual Detection​

Sets the RFID Card detection to Auto or Manual mode.

Automatic Detection Settings​

  1. Touch the Number Pad → Enter Pin number → Press [✱] button twice → 1

Manual Detection Settings​

  1. Touch the Number Pad → Enter Pin number → Press [✱] button twice → 3
note

In Manual Mode, Touch the number pad. Place the RFID Card on the reader and the door will open.

note

In Automatic Mode, Place the RFID Card on the reader and the door will open.

note

Automatic Mode is enable in default.

Normal & Safe Open Mode​

When you purchase the product for the first time, it is set in normal mode.

Normal Mode Settings​

You can open the door by pressing [OPEN / CLOSE] button inside.

  1. Touch the Number Pad → Enter Pin number → Press [✱] button thrice → 4

Safe Mode Settings​

You can open the door by Pressing [Force Lock] button then press the [OPEN / CLOSE] button within one second.

  1. Touch the Number Pad → Enter Pin number → Press [✱] button thrice → 5
note

Pressing [Force Lock] button and [OPEN / CLOSE] button continuously. This enhances the security unlock feature.

Multi-touch Security Setting​

Multi-touch Safe Feature is the security feature that enables user to enter additional series of number after entering pin number. It erases fingerprint traces left on the number pad & protects the pin number from being exposed.

Cancellation: To disable setting, just repeat same setting procedure. And it will be disabled.

note

When multi-touch security is enabled, after entering pin number. Press the 3 random number that is displayed on the screen. Press [✱] button and the door will open.

note

When Multi-touch Security feature is enabled "Random Number" feature is disabled. And when "Random number" feature is enabled, Multi-touch Security Feature is disabled.

Dual-mode Security Setting​

Steps​

  1. Press [Registration] button for 5 seconds. The entire LED will light up. After 3 seconds the alarm will stop. And after 2 seconds it will be on again.
  2. Enter current user password. When you press [✱] button, The front panel LED will blink and light-up.
  3. Press [1] button to Turn-Off Dual-Mode Security. Press [3] button to Turn-On Dual-Mode Security.
  4. During Dual-Mode Security Setting, when the confirmation sound is heard, everything will be turned-off.

How to Open: PIN NUMBER + RFID CARD

note

The Pin Number & Smart Key should be registered first before setting this feature.

Melody Settings​

Steps​

  1. Touch the number Pad. Enter Pin Number. Press [✱] button for 3 times.
  2. Select from the menu — press [7] to turn off melody. press [8] to decrease. press [9] to increase.
note

This will function in manual lock mode only

note

After the melody is heard and the door is not closed but a new function is performed the melody will be off

note

After the door was opened the melody will not be heard

Home Network Module & Remote Control​

Registration​

  1. Press [Registration] button. Enter pin number. Followed by [✱] button.
  2. Home Network Module / Remote Control Registration. Press [Registration] button / Press [Open] button.
  3. For registration of additional remote control. Repeat step number 2.

Deletion Steps​

  1. Press [Registration] button. Enter pin number. Followed by [✱] button.
  2. Press [0] button.
  3. Press [✱] button for 5 seconds. When the melody is heard, deletion is complete.
note

Up to 5 remote controls can be registered.