Skip to main content

Emergency Alarm Features

1. Fire Sensor Alarm​

When the sensor detects abnormally high temperature (≥ 62°C ± 5°C):

  • A loud alarm sounds
  • The door unlocks automatically for evacuation
caution
  • Direct sunlight for long periods may trigger the sensor
  • Even in "Double Lock" mode, the door opens automatically when temperature is high
  • When temperature returns to normal, the lock resumes normal operation

2. Intrusion Alarm​

When the lock detects forced entry from inside or outside, the alarm activates in pulses.

To cancel:

  • Remove the batteries, OR
  • Enter a registered PIN / Card / Fingerprint
note

If temperature is still high (Fire Alarm active), the Intrusion Alarm cannot be cancelled.

3. Anti-Prank Alarm & 1-Minute Lock​

After 5 consecutive failed PIN / Smart Key / Fingerprint attempts:

  • Alarm sounds
  • Lock is disabled for 1 minute

After 1 minute, the lock returns to normal operation.

4. Deadbolt Jammed Alarm​

While opening or closing, if the deadbolt is stuck or improperly placed, the alarm sounds "beep-beep-beep" 3 times.

caution

If the alarm continues or the deadbolt operates abnormally, contact a local installer. Repair costs may apply.

5. Replace Battery Alarm​

During normal operation, if the battery light comes on with sound "beep-ree-reep", the battery is low. Replace all batteries immediately.

6. Emergency Key (Emergency Key version only)​

Use when the lock malfunctions or batteries are dead.

Steps:

  1. Open the key hole cover at the top of the outer handle (push right)
  2. Insert the emergency key into the hole, turn from right to left
  3. When you hear "tik", the deadbolt has moved back to its default position — remove the key
  4. Turn the handle downward to open the door
  5. Push the key hole cover back to close
warning

Store the emergency key in a safe but accessible place, not near the front door.