Alarms & Safety
🔥 High Temperature Alarm Function
warning
Detects high temperature 60°C ± 10°C for 5 seconds → 80dB alarm for 2 minutes + automatic door unlock
Operating conditions:
- Sensor detects temperature ≥ 60°C
- After 5 seconds → 80dB alarm starts
- After 10 seconds → deadbolt opens automatically
- Alarm continues for 2 minutes
Exception: If Door Lock power is off → High Temperature Alarm Function is disabled
tip
- Works on all models
- When active, LED [8] lights
- After temperature drops → system returns to normal
- Cannot be disabled
🚨 Intrusion Alarm Function
warning
If the Deadbolt sensor doesn't respond while deadbolt sensor is on for more than 7 seconds → 80dB alarm
How to cancel:
- Through authentication (PIN, Card, Fingerprint, Remote Control)
Exception:
- If Door Lock power is off → Intrusion Alarm is disabled
- During Intrusion Alarm → LED [5] lights
⚙️ Deadbolt Operation Error Warning Function
warning
If Deadbolt opens or closes but operates abnormally → Deadbolt Operation Error Warning Function activates
Behavior:
- LED [4] lights
- During Deadbolt Operation Error → alarm sounds
- Retries 3 times for normal operation
- If still fails → alarm continues
Features:
- Cannot be disabled
- Prevents deadbolt damage
📊 Self-Diagnosis (LED Indicators)
Keypad LEDs show lock status.
| LED | Meaning |
|---|---|
| LED [1] | FeliCa Auto-Detection ON cannot be set |
| LED [2] | Registration Error / Deletion Error (Dual Authentication ON cannot be set, Setting Error) |
| LED [3] | Card, Fingerprint, Remote Control, Face ID count is FULL / No Fingerprint or Face ID registered |
| LED [4] | Deadbolt Operation Error |
| LED [5] | Intrusion Alarm |
| LED [6] | Authentication Error (unregistered PIN, Card, Fingerprint, Face) |
| LED [7] | Slot number already registered (Card, Fingerprint, Face) |
| LED [8] | Internal / External Forced Lock Setting |
| LED [9] | Fingerprint / Face recognition device malfunction |
| LED [0] | Fingerprint module error (Deadbolt Lock LED lights) |
🔒 Locking from Outside
info
When Deadbolt Auto Lock is enabled (detected by deadbolt sensor):
- Auto-locks immediately
- Sound + notification (if enabled)
Steps:
- Open door → deadbolt sensor detects
- If Deadbolt Auto Lock is on → locks immediately (within 2 seconds)
- If Door Open Alarm is enabled → alarm sounds
Conditions:
- Touch keypad (Manual mode) → locks immediately
- When Deadbolt Auto Lock is on → auto-locks
🚪 Locking from Inside
| Type | How to lock |
|---|---|
| Sub Type (sliding door) | Press OPEN/CLOSE + turn knob |
| Main Type | Press OPEN/CLOSE |
| When Deadbolt Auto Lock is on | Touch keypad 2 sec → auto-lock |
| When Deadbolt Auto Lock is off | Touch keypad 2 sec → manual lock |
📋 Other alarms
Anti-Hacking Alarm (LED [5])
- Detects forced entry
- Alarm sounds
- Cancel with registered PIN/Card/Fingerprint
Fire Alarm
- Same as High Temperature Alarm (LED [8])
- Temperature ≥ 60°C
- Auto-unlock
- 2-minute alarm
Deadbolt Jammed Alarm
- Deadbolt stuck while opening/closing → beep-beep-beep ×3
- Retries 3 times
- If still fails → alarm continues
Replace Battery Alarm
- LED lights + "beep-ree-reep" sound
- Replace all batteries immediately