| 1 | Function Sensor Bar | This is touched to open the fingerprint sensor |
| 2 | Status LED Lamp | Green-colored LED status lamp that lights on during F/P registration & authentication |
| 3 | Battery Lamp | When the battery is low it turns on along with the alarm |
| 4 | RFID Card Reader | It is the card reader where card is placed when opening the door or during card registration |
| 5 | Outbody Handle | It is used when opening or closing the door from outside |
| 6 | Fingerprint Reader | It is where the fingerprint is registered or authenticated to open the door |
| 7 | Number Pad | The pin number is entered here to register or to open the door |
| 8 | Reset Switch | When the product is not functioning normally, initialize the lock through the Reset switch |
| 9 | Emergency Key Hole | Cover / Emergency Key (With mechanical key type only) |
| 10 | Emergency Battery | When the battery is completely discharged. Operate the lock using a 9V battery. |